This model generally requires a 36″ minimum radius for satisfactory operation.
SR&RL loco models CB #16 & #18: model similarities and differences.
Here’s my dilemma, I have one of the Custom Brass, On2, “Could be a 16, could be an 18?” models and I want to get it painted, etc. The tender trailing truck is an archbar (16), the tender deck tool box is missing and the brake cylinder is “under” the tender, not hanging out on the right side as on “18”. The engine has an “18” number board on the front of the smoke box and an “18” style headlight. When I got the model, the cab roof hatch was missing, so it’s anybody’s guess as to which configuration it is, although it does appear to have the stamped slide rails as on “18”. Bottom line: I have an “18” engine and a “16” tender. Was this common with the way Custom Brass imported this “run” of models? Does anyone out there have an 18 tender they would want to swap for my “16” tender? I’d really rather model the “18”. If not, who might have a “16” number board for the smoke box front? The rest of the work (headlight, etc.) I can do myself. Or, I can take care of moving the brake cylinder and building the tool box to convert the tender to make an “18” version — but, I’d need a tender trailing truck replacement for the archbar on the “16” tender. Finally, should I manage to get the engine and tender “matched up”, then come the lettering and striping questions. I assume I’d want gold lettering and aluminum (or white?) striping with a “red lead” roof?
John Hitzeman – MaineOn2 posting _ _ _ _ _ _ _ _ _ _ _
Hi John, I heard about your tender mismatch so I thought I'd add to your confusion. Both the 16 and 18 models have some unique characteristics making the conversion difficult.
Your model, the 18, has strap-end side rods. The 16 has round end rods, correctly modelled on the CB #16. The smokebox fronts are different. The CB model has the first #16 smokebox front, the original smaller front with an extra ring riveted to the outside. It was later replaced with a standard Baldwin design of the period with no door dogs, just boltheads showing. The 18 had a smokebox door with dogs throughout its life as it appears on the model.
To further confuse things I don't believe the 16 had the mismatched trucks and the early smokebox front at the same time.
The tenders from both models use the same shell. The differences are the brake cylinder and trucks as you already noted plus the handrail placing. Plus the 18 had a builder's plate on the tender when the new tender came from Baldwin. Precision lists a 2-foot tender truck that should do for the 18 if it is still available.
Another thing to note is the sander lines. The 18 never had the air sanders on the model, just the single pipe gravity lines. Plus the domes are the wrong height. If you can get a pair from Portland Products they are much more accurate. If you want more, get my number from Bill and call me.
Ray Christopher - MaineOn2 posting