Fast Tracks jig built turnouts etc.

This is a temporary posting to illustrate a discussion point (excuse the pun!).

The issue is the “correct” width of tie to use. The picture below shows (from left to right)

-turnout using Clover House S scale ties (built on home made jig)

-Precision Scale flex track

-Part built turnout using a stock Fast Tracks jig (On2 #8, code 70) and Clover House S scale PCB ties, over the Fast Tracks plan of same turnout with a Fast Tracks recommended tie (PB-S-N) placed underneath.

-Fast Tracks jig with two part built turnouts using Clover House S scale PCB ties, and a Fast Tracks recommended tie.

tstr02

Close-up of the part built turnout using Fast Tracks jig and Clover House S scale PCB ties, on Fast Tracks plan of turnout with a Fast Tracks recommended tie (PB-S-N) placed underneath.

tstr01

 

Use the link on the right titled Fast Tracks to get directly to their On2 page.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s